Scale Remote Displays and Scoreboards: How to Choose One
Updated November 21, 2026
The short answer: a remote display (or scoreboard) repeats the weight from your scale indicator in large digits, so a truck driver, forklift operator or customer can read it from a distance. Choose it by viewing distance (bigger digits for truck scales and across a warehouse), location (sunlight-readable and weatherproof outdoors), and connection (serial cable from the indicator, or wireless). Small LCD and LED repeaters start in the low hundreds of dollars; large outdoor LED scoreboards for truck scales cost a few thousand.
Why add a remote display
- Truck scales: the driver sees the weight from the cab and knows when to pull forward, without climbing down.
- Forklift and floor scales: the operator reads the weight from the seat instead of getting off to look at the indicator.
- Retail and trade counters: the customer sees the weight they're paying for.
- Process and batching: operators across the room can watch a tank or hopper fill.
- Crane and hanging scales: the weight is read safely from a distance, away from the suspended load.
How to choose a remote display: 5 checks
1. Digit size and viewing distance
Bigger digits read from farther away. Displays with about 1-inch digits suit a bench or a nearby counter. Truck scales and long warehouse aisles call for 4-inch digits or larger. Check the rated viewing distance on the product page, and measure the real distance from where people will stand or sit.
2. LED or LCD
Bright LED displays are the usual choice for outdoor and long-distance reading. Backlit LCDs work well indoors and close up. Color displays can also show messages, such as "Pull forward" or "Stop."
3. Indoor or outdoor enclosure
Outdoors you need a weatherproof housing, an anti-glare face, and mounting that keeps direct sun off the display. For washdown or corrosive areas, choose stainless or fiberglass (FRP) enclosures. Hazardous locations need an explosion-proof display rated for the area's class.
4. Connection to the indicator
Most remote displays take a serial output (RS-232 or current loop) from the indicator. Current loop handles longer cable runs. Wireless remotes avoid running cable across a yard. Check that the indicator has a free output and can send continuous weight data in a format the display understands.
5. Legal-for-trade
On many legal-for-trade scales, the customer or driver must be able to see the weight. The requirements come from NIST Handbook 44 and your state weights and measures office, so check with them when you plan a truck scale or trade counter.
Remote display models and prices
Prices are from SellEton product pages at the time of writing (November 2026). Check each product page for the current price.
| Model | What it is | Price |
|---|---|---|
| SellEton SL-910 LED remote display | LED display that repeats the weight from your indicator | $299 to $2,146 |
| SellEton SL-7516-A LED / SL-7516-B LCD scoreboard | Indicator scoreboards for floor and truck scales | $459 to $516 |
| Rice Lake RD-232 | 0.8 in LED in red or green; FRP, stainless, compact or panel mount | $1,176 to $1,536 |
| Rice Lake RD-300 | 1 in backlit LCD; several enclosure types | $1,176 to $1,566 |
| Rice Lake LaserLight LT-60 / LT-100 | Six-digit LED with 2.4 in or 4 in digits for long-range reading | $1,596 to $2,118 |
| Rice Lake LaserLight3 with messaging | Color LED display, digits up to 5 in, can show driver messages | $2,532 to $2,994 |
| Rice Lake EL232-XPCD | Explosion-proof remote display for Class I, II and III hazardous locations | $9,210 |
See the full range in remote displays and Rice Lake remote displays.
Picking a display by scale type
- Truck scale: large outdoor LED digits (4 in or more) facing the driver's side, or a color display that can also show stop and go messages. See our truck scale guide for the rest of the system.
- Floor scale at a dock: a mid-size LED display mounted high on a wall or column where forklift drivers can see it.
- Bench scale or counter: a compact LCD or LED repeater facing the customer.
- Tank or batching system: a panel-mount or wall-mount display near the operator station.
Installation
Run the data cable away from motor and welding cables, protect it in conduit outdoors, and confirm the display and indicator use the same data format before mounting. Wiring to mains power and anything in a hazardous location must be done by a qualified electrician. For a legal-for-trade scale, have a qualified scale technician make the connection and check with your state weights and measures office.
Remote display FAQs
Will a remote display work with my indicator?
Usually, if the indicator has a free serial output that can send continuous weight data. Send us the indicator model and we'll confirm.
How big should the digits be for a truck scale?
Large digits, typically 4 inches or more, so the driver can read them from the cab. Check the display's rated viewing distance against your layout.
Can a remote display be wireless?
Yes. Wireless options avoid trenching cable across a yard; some crane scales also come with a handheld wireless remote.
What's the difference between a remote display and a scoreboard?
Nothing important. "Scoreboard" usually means a large outdoor display for truck and floor scales; "remote display" covers every size.
Get help choosing
Tell us the indicator model, the viewing distance and whether it's indoors or outdoors, and we'll match a display. Call SellEton Scales at (844) 735-5386 or send us a message. To add tickets as well, see our scale printer guide, and for indicators, our scale indicator guide.








